WAC Lighting InvisiLED PRO 2ft 10-Pack Tape Light | Soft White 3000K LED Strip | Under Cabinet & Cove Accent | Model LED-T24P-2IN-10-WT

A 10-pack of 2-foot InvisiLED PRO tape light sections in 3000K soft white - a low-profile LED strip for under-cabinet, cove, and accent lighting where you want even light without visible hardware.

InvisiLED PRO is a silicone-cased LED tape with 3M construction adhesive on the back, so it mounts directly to clean, flat surfaces and disappears into the run. LEDs are spaced every 1 inch on center for smooth, even output with no hot spots. Each 2-foot section draws 3.0 watts per foot and produces 200 lumens per foot, and the run can be field-cut every 2 inches at the end to fit your exact length.

Best for

• Under-cabinet kitchen task lighting where a slim, hidden strip is preferred over a visible fixture
• Cove and toe-kick accent lighting in living rooms, bedrooms, and stairways
• Display cases, shelving, and retail or gallery accent runs
• Damp interior locations such as bathrooms and covered porches (rated for damp use)
• Projects needing a cuttable, linkable run from 1 ft up to 33 ft

Not ideal for

• Wet locations or direct-exposure outdoor areas - this tape is rated for damp use only
• Applications needing a finished fixture look - this is bare tape and requires a clean mounting surface
• Runs longer than 33 ft without additional power or a new run

How bright is it?

200 lumens per foot - roughly equivalent to a 25W incandescent bulb per foot. A typical 10 ft run produces about 2,000 lumens, enough for under-cabinet task lighting or cove accent, but not a substitute for a primary room light.

Light color and feel

3000K soft white - a warm, slightly golden tone similar to halogen. CRI 85 renders colors well for kitchens and displays. Dimmable with an electronic low voltage (ELV) dimmer.

Sizing and fit

Each section is 2 ft long; the 10-pack covers 20 ft total. Minimum run length is 1 ft and maximum is 33 ft. Tape may be field cut every 2 inches at the end of a run. Sections measure W 3 in x D 4 in x H 2 in per pack.

Specifications

• InvisiLED PRO 3000K
• 12 LEDs per foot, evenly spaced every 1 in on center
• Silicone cased tape with 3M construction adhesive
• Low power consumption with high lumen output
• Minimum run length 1 ft; maximum 33 ft
• May be field cut every 2 in at the end of a run
• May be dimmed with electronic low voltage (ELV) dimmer
• 50,000 hour rated life
• Max wattage: 3.0 per foot
• Bulb type: LED (spaced every 1 in)
• Lamp base: integrated LED module
• Lamp voltage: 24V
• Lumens: 200.0 per foot
• Efficacy: 66.7 lm/W
• Color temp: 3000K
• Color rendering index: 85
• Estimated life: 50,000 hours
• Part of the InvisiLED collection
• UL/ETL listed
• For damp use
• Warranty: 5 years
• Item weight: 0.19 lb

Frequently asked

Is the power supply included? No - a 24V driver is required and sold separately.

Is it dimmable, and what dimmer should I use? Yes, with an electronic low voltage (ELV) dimmer.

Can I install this in a bathroom or outdoors? It is rated for damp use, so bathrooms and covered porches are fine; wet or exposed outdoor locations are not.

What's the warranty? 5 years.

Can I cut the tape to length? Yes - field cut every 2 inches at the end of a run.

Most of our items will ship within 24-48 hours within the receipt of the order.

You will receive tracking information as soon as your order leaves our warehouse.

Almost all products on hausappeal.com are returnable. The few exceptions include unsealed mattresses, assembled or modified products, and clearance merchandise. Any product that is non-returnable will note that on its product page.

All returns must be unused and shipped back in the original packaging to the warehouse address from which the order was shipped.  To initiate a return, send an email to us at Service@hausappeal.com so that we can provide you with a Return Authorization Number. Upon inspection of the return, you will receive a full refund of product cost minus our outbound shipping costs.