Toltec Franklin 10in 1-Light Wall Sconce | Modern Graphite and Smoke Bubble Glass | Bathroom & Hallway Accent Light | Model 1211-GP-262

A 10-inch hardwired wall sconce with a smoke bubble glass shade and graphite finish, sized for bathrooms, hallways, and bedroom accent lighting.

The Franklin sconce pairs a sleek graphite-finished steel body with a 4.5 x 6.5 inch smoke bubble glass shade. The smoky tint and delicate internal bubbles give the glass depth and texture, so the fixture reads as a design detail even when the light is off. It is a natural fit for contemporary and transitional interiors that want a little visual interest without a lot of bulk.

Best for

• Bathrooms and powder rooms - damp-rated and hardwired for a clean, permanent install
• Hallways and stairwells where a small, low-profile accent light is needed
• Bedrooms, mounted beside the bed as a reading or ambient sconce
• Living rooms and entryways as a decorative up/down light

Not ideal for

• Outdoor or uncovered patio areas - this fixture is rated for damp locations only
• Rooms where you need a primary light source - one 100W bulb provides accent-level output, not whole-room illumination
• Renters or anyone who cannot hardwire a fixture - this is a hardwired install, not a plug-in

How bright is it?

Lumen output is not specified by the manufacturer. The fixture accepts one 100W medium-base bulb, which is typical accent-level brightness for a sconce - enough to light a hallway or bedside area, not a whole room.

Light color and feel

Light color depends on the bulb you choose; no color temperature is specified by the manufacturer. The smoke bubble glass softens and diffuses the glow, giving it a warm, slightly moody character. Dimmability depends on the bulb and dimmer used - the fixture itself does not specify a dimmer rating.

Sizing and fit

Overall dimensions are 4.5 in wide x 5.75 in deep x 10 in high, with a 4.5 x 5.5 in backplate. The 5.75 in depth means it projects a modest amount from the wall, so it works well in narrow hallways and beside a bed. At 10 in tall it suits standard 8-9 ft ceilings and most bathroom vanity walls.

Specifications

• Primary Finish: Graphite
• Primary Made of Steel; Glass
• Shade Description: 4.5 in W x 6.5 in H Smoke Bubble Glass
• Shade Material: Glass
• Collection: Franklin
• Light Direction: Up/Down
• (1) 100W LED Bulb(s)
• Lamp Type: Medium
• Bulb Base: E26/Medium (Standard)
• Voltage: 120
• Rated For: Damp
• Safety Rating: UL/CUL Listed
• Assembly Required: True
• Hardwired or Plug In: Hardwired
• Warranty: 1 Year
• Overall Dimensions: 5.75 in D x 4.5 in W x 10 in H
• Overall Height: 10 in
• Backplate Dimensions: W 4.5 in x H 5.5 in
• Item Weight: 2 lbs.

Frequently asked

Is the bulb included? No - the bulb is not included. It takes one E26 medium-base bulb up to 100W.

Is it dimmable, and what dimmer should I use? The fixture does not specify a dimmer rating. Dimmability depends on the bulb and wall dimmer you pair it with.

Can I install this in a bathroom or outdoors? It is rated for damp locations, so bathrooms and covered areas are fine. It is not rated for wet or fully exposed outdoor locations.

What's the warranty? 1 year.

Does it mount up or down? The light direction is up/down, so the shade can be oriented either way depending on the look you want.

Most of our items will ship within 24-48 hours within the receipt of the order.

You will receive tracking information as soon as your order leaves our warehouse.

Almost all products on hausappeal.com are returnable. The few exceptions include unsealed mattresses, assembled or modified products, and clearance merchandise. Any product that is non-returnable will note that on its product page.

All returns must be unused and shipped back in the original packaging to the warehouse address from which the order was shipped.  To initiate a return, send an email to us at Service@hausappeal.com so that we can provide you with a Return Authorization Number. Upon inspection of the return, you will receive a full refund of product cost minus our outbound shipping costs.