Nora Lighting

Part of the LED LINEAR Collection Finish: Aluminum/White End Caps Overall Dimensions: 29.5"(L) x 2.75"(W) x 0.68"(H)Item Weight: 0.5 lbs.

Part of the LED LINEAR Collection Finish: Aluminum/White End Caps Overall Dimensions: 29.5"(L) x 2.75"(W) x 0.68"(H)Item Weight: 0.3 lbs.

Live end feed powers the track system from the end of a run. Junction box canopy mounts over a 4" or 3" octagon outlet box and includes two knockou...

Live end feed powers the track system from the end of a run. Junction box canopy mounts over a 4" or 3" octagon outlet box and includes two knockou...

Live end feed powers the track system from the end of a run. Junction box canopy mounts over a 4" or 3" octagon outlet box and includes two knockou...

Live end feed powers the track system from the end of a run. Junction box canopy mounts over a 4" or 3" octagon outlet box and includes two knockou...

Live end feed powers the track system from the end of a run. Junction box canopy mounts over a 4" or 3" octagon outlet box and includes two knockou...

Live end feed powers the track system from the end of a run. Junction box canopy mounts over a 4" or 3" octagon outlet box and includes two knockou...

An eyelid is used to convert 4" Onyx round reflectors or baffles to half-moon wall wash trim. Finish: White Compatible Luminaires:NOXAC-431: 4" AC ...

Straight Connector is used to connect two pieces of track together and carry the electricity. Cannot be used as a power feed. Compatible Track Syst...

Square trim replaces round trim included with NM4-R470. Finish: Matte Powder White Part of the M4 Collection Finish: Matte Powder White Overall Dim...

RF Controller is required for RGBW LED Tape Light or CCT LED Tape Light. Installs between the driver and the power line interconnector. The control...

Part of the Roundback Cylinder Collection Finish: White Bulb Wattage: 150W Safety Rating: CULUS Listed For Use in Dry Locations

Part of the Roundback Cylinder Collection Finish: White Bulb Wattage: 150W Safety Rating: CULUS Listed For Use in Dry Locations

Part of the Roundback Cylinder Collection Finish: White Bulb Wattage: 50W Safety Rating: CULUS Listed For Use in Dry Locations Overall Dimensions:...

Part of the TRACK LED Collection Finish: White

Part of the TRACK LED Collection Finish: White

L-Connector is used to connect two pieces of track together in a right angle and carry the electricity. Can be used as a power feed with one knocko...

Junction box used to power LED luminaires using hardwire power cord or jumper cables. Finish: White Compatible Luminaires: NULS: 120V LED Linear Pa...

I-Connector is used to connect two pieces of track together and carry the electricity. Can be used as a power feed with one knockout. Compatible Tr...

Hand held remote is used to program RGBW or CCT tape light to certain color configurations. The remote can be used up to 90" from controller, must ...

Part of the Rear Loading Gimbal Collection Finish: White Bulb Wattage: 75W Safety Rating: CULUS Listed For Use in Dry Locations Overall Dimensions...

Part of the Rear Loading Gimbal Collection Finish: White Bulb Wattage: 75W Safety Rating: CULUS Listed For Use in Dry Locations Overall Dimensions...

Part of the Rear Loading Gimbal Collection Finish: White Bulb Wattage: 50W Safety Rating: CULUS Listed For Use in Dry Locations Overall Dimensions...

Part of the Rear Loading Gimbal Collection Finish: White Bulb Wattage: 50W Safety Rating: CULUS Listed For Use in Dry Locations Overall Dimensions...

A flexible connector is used to connect two pieces of track and carry electricity for any angle between 0 ° and 90 °, allowing for horizontal or ve...

Connects two luminaires seamlessly. Compatible Fixtures: NULB120Finish: White Part of the 120V Lightbar Collection Finish: White Overall Dimensions...

Connects two luminaires seamlessly. (Note: One connector is included with each fixture) Compatible Fixtures: NUDA Finish: Matte Powder White Part o...

A rubber end cap is used to cover the open end of a luminaire. Compatible Fixtures: NULB120Finish: White Part of the 120V Lightbar Collection Finis...

A surface mount enclosure with an emergency LED driver for use with 6" ELO and ELO+ luminaires. It adds 1-1/2" height to luminaire and matches the ...

Remote emergency LED head provides superior aiming and flexible appearance along with excellent performance. Internal solid state switching automat...

Wet location rated LED emergency luminaire with two adjustable heads. Luminaire is powered by a remote 3V or 12VDC emergency backup battery install...

96" Power cord used to connect luminaire to junction box. Compatible Fixtures: NULB120 Finish: White Part of the 120V Lightbar Collection Finish: W...

72" Jumper cable is used to connect two luminaires. Compatible Fixtures: NUDA Finish: Matte Powder White Part of the 120V Adjustable LEDUR Collecti...

72" 3-Wire Power cord used to connect luminaire to NULSA-JBOX or junction box. Compatible Fixtures: NULS Finish: White Part of the NULS Collection ...

72" 3-Wire Power cord used to connect luminaire to NUA-902 or junction box. Compatible Fixtures: NUDA Finish: Matte Powder White Part of the 120V A...

72" 3-Wire Cord used to connect the luminaire to an outlet. Compatible Fixtures: NULS Finish: White Part of the NULS Collection Finish: White Overa...

7" SURF LED Surface Mount luminaires are only 11/16" thick with a DC driver mounted on the back. Luminaires resemble the appearance of a recessed d...

60" Power cord used to connect luminaire to junction box. Compatible Fixtures: NULB120 Finish: White Part of the 120V Lightbar Collection Finish: W...

Part of the 6" Trim Collection Finish: White Bulb Wattage: 75 Safety Rating: CULUS Listed Overall Dimensions: 7.5"(L) x 7.5"(W) x 4"(H)Item Weight...

Part of the REC SLOPE 6" TRIM Collection Finish: White Bulb Wattage: 150 Safety Rating: CULUS Listed Overall Dimensions: 7.88"(L) x 7.63"(W) x 4.7...

Part of the REC SLOPE 6" TRIM Collection Finish: White Bulb Wattage: 150 Safety Rating: CULUS Listed Overall Dimensions: 7.88"(L) x 7.5"(W) x 4.25...

6" Jumper cable is used to connect two luminaires or to NULSA-JBOX. Compatible Fixtures: NULS Finish: White Part of the NULS Collection Finish: Whi...

6" Jumper cable is used to connect two luminaires. Compatible Fixtures: NULB120Finish: White Part of the 120V Lightbar Collection Finish: White Ove...

6" Jumper cable is used to connect two luminaires. Compatible Fixtures: NUDAFinish: Matte Powder White Part of the 120V Adjustable LEDUR Collection...

6" Jumper cable with 90˚ connector is used to connect two luminaires or to NULSA-JBOX. Compatible Fixtures: NULS Finish: White Part of the NULS Col...

Extension cables are used to extend the length between luminaire and driver enclosure. Can be connected together to create custom lengths. Maximum ...