ET2 Lighting Cubist 18in 1-Light Wall Sconce | Modern Polished Chrome and White Acrylic | Bathroom Vanity & Hallway Accent | Model E21681-PC

A slim 18-inch integrated-LED wall sconce in polished chrome, built for bathroom vanities, hallways, and modern accent walls.

The Cubist sconce pairs a clean aluminum body in polished chrome with a white acrylic diffuser that spreads light evenly up and down the wall. At just 2.25 inches wide and 3.5 inches off the wall, it sits nearly flush - a good fit for tight vanities, mirror surrounds, and corridors where a bulky fixture would crowd the space. The ADA-compliant profile means it stays within the 4-inch projection limit for accessible design.

Best for

• Bathroom vanities flanking a mirror - damp-location rated, so it handles humid rooms
• Hallways and stairwells where a low-profile, even wash of light is wanted
• Modern or minimalist interiors that call for a clean chrome accent
• Vertical or horizontal mounting - orient it to suit the wall

Not ideal for

• Large rooms needing a primary light source - 250 lumens is accent-level output
• Outdoor or shower-exposed areas - rated for damp locations only, not wet
• Traditional or rustic decors - the polished chrome and acrylic read distinctly modern

How bright is it?

250 lumens - roughly the output of a 25W incandescent bulb. That makes it an accent and ambient layer, ideal beside a mirror or along a hallway, not a replacement for a room's main light.

Light color and feel

3000K warm white gives a soft, golden tone similar to traditional incandescent - flattering in bathrooms and warm-toned interiors. CRI 90 renders colors accurately, which helps around mirrors and skin tones. Dimmable with a 3-in-1 driver supporting Triac, ELV, or 0-10V dimming.

Sizing and fit

18 inches long, 2.25 inches wide, and 3.5 inches of extension from the wall, with a 2.25 x 2.25 inch backplate. The slim ADA profile suits narrow vanity walls and tight hallways; mount vertically or horizontally.

Specifications

• Part of the Cubist Collection
• Finish: Polished Chrome
• Made of Aluminum, Acrylic
• (1) 7W DC Integrated LED Bulb
• Bulb Color Temp: 3000K
• Bulb Average Hours: 30,000
• Bulb Lumens: 250
• Bulb CRI: 90
• Input Voltage: 120-277
• Output Voltage: 24
• Light Type: LED
• Dimmable: 3-in-1 - Triac, ELV, or 0-10V
• Length of Electrical Wire: 8 in
• ADA: Yes
• Light Direction: Omni
• Install Position: Vertical/Horizontal
• For Use in Damp Locations
• Safety Rating: cETLus Listed
• Overall Dimensions: 18 in L x 2.25 in W
• Extension: 3.5 in
• Backplate: 2.25 in W x 2.25 in H
• Item Weight: 2.68 lbs

Frequently asked

Is the bulb included? Yes - the integrated 7W LED is built in and rated for about 30,000 hours.

Is it dimmable, and what dimmer should I use? Yes. The 3-in-1 driver works with Triac, ELV, or 0-10V dimming systems.

Can I install this in a bathroom or outdoors? It is rated for damp locations, so bathroom vanities are fine. It is not rated for wet locations or direct outdoor exposure.

What's the warranty? Warranty terms are not specified by the manufacturer in the supplied data.

Can it mount horizontally? Yes - the install position supports both vertical and horizontal orientation.

Most of our items will ship within 24-48 hours within the receipt of the order.

You will receive tracking information as soon as your order leaves our warehouse.

Almost all products on hausappeal.com are returnable. The few exceptions include unsealed mattresses, assembled or modified products, and clearance merchandise. Any product that is non-returnable will note that on its product page.

All returns must be unused and shipped back in the original packaging to the warehouse address from which the order was shipped.  To initiate a return, send an email to us at Service@hausappeal.com so that we can provide you with a Return Authorization Number. Upon inspection of the return, you will receive a full refund of product cost minus our outbound shipping costs.